Adds a message to the generic class referenced by the given class ID.

Scopes

You will need authorization for the https://www.googleapis.com/auth/wallet_object.issuer scope to make a valid call.

If unset, the scope for this method defaults to https://www.googleapis.com/auth/wallet_object.issuer. You can set the scope for this method like this: walletobjects1 --scope <scope> genericclass addmessage ...

Required Scalar Argument

  • <resource-id> (string)
    • The unique identifier for a class. This ID must be unique across all classes from an issuer. This value should follow the format issuer ID. identifier where the former is issued by Google and latter is chosen by you. Your unique identifier should only include alphanumeric characters, '.', '_', or '-'.

Required Request Value

The request value is a data-structure with various fields. Each field may be a simple scalar or another data-structure. In the latter case it is advised to set the field-cursor to the data-structure's field to specify values more concisely.

For example, a structure like this:

AddMessageRequest:
  message:
    body: string
    display-interval:
      end:
        date: string
      kind: string
      start:
        date: string
    header: string
    id: string
    kind: string
    localized-body:
      default-value:
        kind: string
        language: string
        value: string
      kind: string
    localized-header:
      default-value:
        kind: string
        language: string
        value: string
      kind: string
    message-type: string

can be set completely with the following arguments which are assumed to be executed in the given order. Note how the cursor position is adjusted to the respective structures, allowing simple field names to be used most of the time.

  • -r .message body=takimata
    • The message body.

  • display-interval.end date=vero

    • An ISO 8601 extended format date/time. Offset may or may not be required (refer to the parent field's documentation). Time may be specified up to nanosecond precision. Offsets may be specified with seconds precision (even though offset seconds is not part of ISO 8601). For example: 1985-04-12T23:20:50.52Z would be 20 minutes and 50.52 seconds after the 23rd hour of April 12th, 1985 in UTC. 1985-04-12T19:20:50.52-04:00 would be 20 minutes and 50.52 seconds after the 19th hour of April 12th, 1985, 4 hours before UTC (same instant in time as the above example). If the date/time is intended for a physical location in New York, this would be the equivalent of Eastern Daylight Time (EDT). Remember that offset varies in regions that observe Daylight Saving Time (or Summer Time), depending on the time of the year. 1985-04-12T19:20:50.52 would be 20 minutes and 50.52 seconds after the 19th hour of April 12th, 1985 with no offset information. Providing an offset makes this an absolute instant in time around the world. The date/time will be adjusted based on the user's time zone. For example, a time of 2018-06-19T18:30:00-04:00 will be 18:30:00 for a user in New York and 15:30:00 for a user in Los Angeles. Omitting the offset makes this a local date/time, representing several instants in time around the world. The date/time will always be in the user's current time zone. For example, a time of 2018-06-19T18:30:00 will be 18:30:00 for a user in New York and also 18:30:00 for a user in Los Angeles. This is useful when the same local date/time should apply to many physical locations across several time zones.

  • .. kind=labore

    • Identifies what kind of resource this is. Value: the fixed string &#34;walletobjects#timeInterval&#34;.

  • start date=sit

    • An ISO 8601 extended format date/time. Offset may or may not be required (refer to the parent field's documentation). Time may be specified up to nanosecond precision. Offsets may be specified with seconds precision (even though offset seconds is not part of ISO 8601). For example: 1985-04-12T23:20:50.52Z would be 20 minutes and 50.52 seconds after the 23rd hour of April 12th, 1985 in UTC. 1985-04-12T19:20:50.52-04:00 would be 20 minutes and 50.52 seconds after the 19th hour of April 12th, 1985, 4 hours before UTC (same instant in time as the above example). If the date/time is intended for a physical location in New York, this would be the equivalent of Eastern Daylight Time (EDT). Remember that offset varies in regions that observe Daylight Saving Time (or Summer Time), depending on the time of the year. 1985-04-12T19:20:50.52 would be 20 minutes and 50.52 seconds after the 19th hour of April 12th, 1985 with no offset information. Providing an offset makes this an absolute instant in time around the world. The date/time will be adjusted based on the user's time zone. For example, a time of 2018-06-19T18:30:00-04:00 will be 18:30:00 for a user in New York and 15:30:00 for a user in Los Angeles. Omitting the offset makes this a local date/time, representing several instants in time around the world. The date/time will always be in the user's current time zone. For example, a time of 2018-06-19T18:30:00 will be 18:30:00 for a user in New York and also 18:30:00 for a user in Los Angeles. This is useful when the same local date/time should apply to many physical locations across several time zones.

  • ... header=eirmod

    • The message header.
  • id=sanctus
    • The ID associated with a message. This field is here to enable ease of management of messages. Notice ID values could possibly duplicate across multiple messages in the same class/instance, and care must be taken to select a reasonable ID for each message.
  • kind=consetetur
    • Identifies what kind of resource this is. Value: the fixed string &#34;walletobjects#walletObjectMessage&#34;.
  • localized-body.default-value kind=magna
    • Identifies what kind of resource this is. Value: the fixed string &#34;walletobjects#translatedString&#34;.
  • language=sit
    • Represents the BCP 47 language tag. Example values are "en-US", "en-GB", "de", or "de-AT".

  • value=vero

    • The UTF-8 encoded translated string.

  • .. kind=duo

    • Identifies what kind of resource this is. Value: the fixed string &#34;walletobjects#localizedString&#34;.

  • ..localized-header.default-value kind=et

    • Identifies what kind of resource this is. Value: the fixed string &#34;walletobjects#translatedString&#34;.
  • language=est
    • Represents the BCP 47 language tag. Example values are "en-US", "en-GB", "de", or "de-AT".

  • value=vero

    • The UTF-8 encoded translated string.

  • .. kind=clita

    • Identifies what kind of resource this is. Value: the fixed string &#34;walletobjects#localizedString&#34;.

  • .. message-type=justo

    • The message type.

About Cursors

The cursor position is key to comfortably set complex nested structures. The following rules apply:

  • The cursor position is always set relative to the current one, unless the field name starts with the . character. Fields can be nested such as in -r f.s.o .
  • The cursor position is set relative to the top-level structure if it starts with ., e.g. -r .s.s
  • You can also set nested fields without setting the cursor explicitly. For example, to set a value relative to the current cursor position, you would specify -r struct.sub_struct=bar.
  • You can move the cursor one level up by using ... Each additional . moves it up one additional level. E.g. ... would go three levels up.

Optional Output Flags

The method's return value a JSON encoded structure, which will be written to standard output by default.

  • -o out
    • out specifies the destination to which to write the server's result to. It will be a JSON-encoded structure. The destination may be - to indicate standard output, or a filepath that is to contain the received bytes. If unset, it defaults to standard output.

Optional General Properties

The following properties can configure any call, and are not specific to this method.

  • -p $-xgafv=string

    • V1 error format.

  • -p access-token=string

    • OAuth access token.

  • -p alt=string

    • Data format for response.

  • -p callback=string

    • JSONP

  • -p fields=string

    • Selector specifying which fields to include in a partial response.

  • -p key=string

    • API key. Your API key identifies your project and provides you with API access, quota, and reports. Required unless you provide an OAuth 2.0 token.

  • -p oauth-token=string

    • OAuth 2.0 token for the current user.

  • -p pretty-print=boolean

    • Returns response with indentations and line breaks.

  • -p quota-user=string

    • Available to use for quota purposes for server-side applications. Can be any arbitrary string assigned to a user, but should not exceed 40 characters.

  • -p upload-type=string

    • Legacy upload protocol for media (e.g. "media", "multipart").

  • -p upload-protocol=string

    • Upload protocol for media (e.g. "raw", "multipart").