Creates a new UtilizationReport.

Scopes

You will need authorization for the https://www.googleapis.com/auth/cloud-platform scope to make a valid call.

If unset, the scope for this method defaults to https://www.googleapis.com/auth/cloud-platform. You can set the scope for this method like this: vmmigration1 --scope <scope> projects locations-sources-utilization-reports-create ...

Required Scalar Argument

  • <parent> (string)
    • Required. The Utilization Report's parent.

Required Request Value

The request value is a data-structure with various fields. Each field may be a simple scalar or another data-structure. In the latter case it is advised to set the field-cursor to the data-structure's field to specify values more concisely.

For example, a structure like this:

UtilizationReport:
  create-time: string
  display-name: string
  error:
    code: integer
    message: string
  frame-end-time: string
  name: string
  state: string
  state-time: string
  time-frame: string
  vm-count: integer

can be set completely with the following arguments which are assumed to be executed in the given order. Note how the cursor position is adjusted to the respective structures, allowing simple field names to be used most of the time.

  • -r . create-time=eirmod
    • Output only. The time the report was created (this refers to the time of the request, not the time the report creation completed).
  • display-name=dolor
    • The report display name, as assigned by the user.
  • error code=6
    • The status code, which should be an enum value of google.rpc.Code.

  • message=dolor

    • A developer-facing error message, which should be in English. Any user-facing error message should be localized and sent in the google.rpc.Status.details field, or localized by the client.

  • .. frame-end-time=dolor

    • Output only. The point in time when the time frame ends. Notice that the time frame is counted backwards. For instance if the "frame_end_time" value is 2021/01/20 and the time frame is WEEK then the report covers the week between 2021/01/20 and 2021/01/14.
  • name=consetetur
    • Output only. The report unique name.
  • state=et
    • Output only. Current state of the report.
  • state-time=sit
    • Output only. The time the state was last set.
  • time-frame=lorem
    • Time frame of the report.
  • vm-count=60
    • Output only. Total number of VMs included in the report.

About Cursors

The cursor position is key to comfortably set complex nested structures. The following rules apply:

  • The cursor position is always set relative to the current one, unless the field name starts with the . character. Fields can be nested such as in -r f.s.o .
  • The cursor position is set relative to the top-level structure if it starts with ., e.g. -r .s.s
  • You can also set nested fields without setting the cursor explicitly. For example, to set a value relative to the current cursor position, you would specify -r struct.sub_struct=bar.
  • You can move the cursor one level up by using ... Each additional . moves it up one additional level. E.g. ... would go three levels up.

Optional Output Flags

The method's return value a JSON encoded structure, which will be written to standard output by default.

  • -o out
    • out specifies the destination to which to write the server's result to. It will be a JSON-encoded structure. The destination may be - to indicate standard output, or a filepath that is to contain the received bytes. If unset, it defaults to standard output.

Optional Method Properties

You may set the following properties to further configure the call. Please note that -p is followed by one or more key-value-pairs, and is called like this -p k1=v1 k2=v2 even though the listing below repeats the -p for completeness.

  • -p request-id=string

    • A request ID to identify requests. Specify a unique request ID so that if you must retry your request, the server will know to ignore the request if it has already been completed. The server will guarantee that for at least 60 minutes since the first request. For example, consider a situation where you make an initial request and the request times out. If you make the request again with the same request ID, the server can check if original operation with the same request ID was received, and if so, will ignore the second request. This prevents clients from accidentally creating duplicate commitments. The request ID must be a valid UUID with the exception that zero UUID is not supported (00000000-0000-0000-0000-000000000000).

  • -p utilization-report-id=string

    • Required. The ID to use for the report, which will become the final component of the reports's resource name. This value maximum length is 63 characters, and valid characters are /a-z-/. It must start with an english letter and must not end with a hyphen.

Optional General Properties

The following properties can configure any call, and are not specific to this method.

  • -p $-xgafv=string

    • V1 error format.

  • -p access-token=string

    • OAuth access token.

  • -p alt=string

    • Data format for response.

  • -p callback=string

    • JSONP

  • -p fields=string

    • Selector specifying which fields to include in a partial response.

  • -p key=string

    • API key. Your API key identifies your project and provides you with API access, quota, and reports. Required unless you provide an OAuth 2.0 token.

  • -p oauth-token=string

    • OAuth 2.0 token for the current user.

  • -p pretty-print=boolean

    • Returns response with indentations and line breaks.

  • -p quota-user=string

    • Available to use for quota purposes for server-side applications. Can be any arbitrary string assigned to a user, but should not exceed 40 characters.

  • -p upload-type=string

    • Legacy upload protocol for media (e.g. "media", "multipart").

  • -p upload-protocol=string

    • Upload protocol for media (e.g. "raw", "multipart").